Networking · 5 min read · 2026-11-20

Public Peering vs Private Peering vs Transit: How Indian Networks Connect

Transit, public peering at an internet exchange, or private peering? What each reaches, what it costs, what it needs, and when peering pays off in India.

Public Peering vs Private Peering vs Transit: How Indian Networks Connect

Every network that reaches the internet pays for it in one of three ways, and most use all three at once. The words get used loosely, which makes the choice harder than it needs to be. Here is what each one actually is, and when it is worth doing.

Transit: paying someone to carry everything

Transit is the default. You buy a connection from an upstream provider, and they carry your traffic to the entire internet and bring the replies back. You pay for what you use, usually on a committed-rate contract with a burst allowance.

It is simple, it needs no relationships, and it works on day one. It is also the most expensive way to move a gigabit, and every packet takes whatever path your upstream chooses — which may mean a request from a Hyderabad user to a Hyderabad-hosted service travels to Mumbai and back.

Transit buys reach. That is the whole product.

Peering: swapping traffic directly

Peering is two networks agreeing to exchange traffic with each other directly, usually without either paying the other. The important limit: peering carries only each network's own routes and its customers' routes. It does not get you to the rest of the internet. That is why peering supplements transit and does not replace it.

What it buys is shorter paths, lower latency, and traffic that no longer counts against your transit bill.

Public peering

You connect once to an internet exchange — a shared switching fabric where many networks meet — and from that single port you can reach every other network on the fabric that is willing to peer with you.

Most exchanges run a route server. One BGP session to the route server gets you routes from every member that participates, instead of negotiating and configuring sessions one by one. That is what makes public peering practical for a mid-sized network: the effort does not grow with the number of peers.

You can still peer bilaterally across the same fabric — a direct BGP session with one specific member, outside the route server — when you want different policy with that network.

Private peering

A dedicated link between exactly two networks, usually a cross-connect in a facility where both have equipment. No shared fabric, no other members.

It costs more and serves one relationship, so it only makes sense when the traffic to that one network is large enough and steady enough to justify it. Below that threshold, the exchange port is better value.

Which to use, and when

ReachTypical costWorth it when
TransitThe whole internetHighest per MbpsAlways. This is your baseline.
Public peeringMembers of the exchangePort + cross-connectYou have steady traffic to several networks
Private peeringOne networkCross-connect, often higherOne destination dominates your traffic

The usual progression is transit first, then an exchange port once traffic justifies it, then private links to whichever one or two networks turn out to dominate.

What peering actually requires

This is the part that is usually underestimated. To peer you need:

  • Your own AS number and IP space. In India that means an APNIC membership, directly or through a sponsor. Without an ASN you cannot run BGP with anyone.
  • A router that can hold the sessions, with enough memory for the routes you will accept.
  • Prefix filters and a max-prefix limit on every session. Without them a peer's mistake becomes your outage. This is not optional and it is the single commonest cause of a peering session causing more harm than it prevents.
  • Route origin validation — publishing your routes in IRR and RPKI, and checking what you accept. Exchanges increasingly expect it.
  • Somebody watching the sessions. A peering session that silently drops is a path that quietly got worse.

If you do not have an AS number

Most businesses asking about peering do not actually want peering. They want their internet to stop going down, and they have been told BGP is the answer.

For that problem, dual ISPs with automatic failover and load balancing gets you most of the resilience for a fraction of the complexity, and needs no ASN, no APNIC membership and no peer relationships. We wrote about where the line sits in Two internet lines is not redundancy.

Peering is worth doing when your traffic volume makes transit expensive, or when latency to specific networks is a product problem. Below that, it is engineering effort spent on the wrong thing.

Working out whether it pays

The arithmetic is simpler than it looks. Take your transit bill, work out what share of your traffic goes to networks you could peer with, and compare the saving against the port, the cross-connect and the engineering time. If the honest answer is a rounding error, the better first move is a second ISP and good failover.

Our bandwidth calculator will tell you what you are actually pushing, which is usually the number people are least sure of.


iActive Solutions plans and configures peering and internet exchange connectivity from Dr. A.S. Rao Nagar, Secunderabad — BGP configuration, prefix filters, the link to the exchange, and monitoring once sessions are up. Seventeen years of network engineering behind it.

If you want a straight answer on whether peering will pay off for your network, or whether a better multi-ISP setup is the smarter first step, that is the conversation we would rather have.

Peering & internet exchange in Hyderabad · IT infrastructure & support · Call +91 92469 14094

More articles

Have a project?

Our engineers can help design and deploy the right solution.